Thursday, November 24, 2011

Tips and How to Fix Windows XP Without Reformatting



Before you reinstall or reformat Computer, I will tell you errors contained in the Windows Xp OS, In The article below, there are tips to improve if the OS of Windows XP on your PC without re Installation
;



Correcting Windows XP re-installation




If Windows XP damaged (corrupted) where you do not have another operating system to boot,
You can do the repair installation (Repair Install) who works as setting at
the beginning.

Then:

* Make sure you have the key (key) Windows XP is valid.
* The entire process will take less than 1 / 2 or 1 hour, depending on your computer spec.
* If you are asked for an administrator password, you should select the the second repair option,
not the first one.
* Insert your Windows XP CD and then boot from the CD.
* When it appears the second repair option R = Repair, press the R, This will start the repair.
* Press the F8 key to agree the next process "I Agree at the Licensing Agreement"
* Press the R button when the directory where you installed Windows XP. Usually C: \ WINDOWS
Next will be checked drive C: and start copying files. And automatically restart if needed. Let your CD in the drive.
* Next you will see a picture of "progress bar" which is part of the improvement,
he looks like a normal XP installation normally, including "Collecting Information, Dynamic Update,

Preparing Installation, Installing Windows, Finalizing Installation

* When asked, click the Next button
* When asked to enter a keyword, enter the key (key) Windows XP valid.
* Normally you want to remain in the Domain or Workgroup name the same.
* The computer will restart.
* Then you will have the same screen as the activation of the system as a normal installation.
* Register if you want it (usually not necessary).
* Done;)

Now you can log in with your account that already exists.



NTOSKRNL Damaged or Missing



If you find an error message that "NTOSKRNL not found" / NTOSKRNL not found, do this steps:

* Insert the Windows XP CD and booting from the CD.
* At the time appeared R = Repair option first, press the R.
* Press the number according to the location of the Windows installation you want repaired as appropriate.
* Usually, # 1
* Change to your CD Drive you are.
* Write: CD i386
* Write: ntkrnlmp.ex_ expand C: \ Windows \ System32 \ Ntoskrnl.exe
* If you installed Windows XP on the somewhere else, change it to proper location.
* Remove your CD and type EXIT
* Finish

HAL.DLL Damaged or Missing




If you get errors related to corrupted or missing hal.dll file, it is possible
BOOT.INI file had the wrong configuration (mis-configured.)

* Insert the Windows XP CD and booting from the CD.
* At the time appeared R = Repair option first, press the R.
* Press the number according to the location of the Windows installation you want repaired as appropriate.
* Usually, # 1
* Write: bootcfg / list

How to show content / input of the current BOOT.INI file



* Write: bootcfg / rebuild

* Change the configuration of the BOOT.INI file

* Remove your CD and type EXIT




Directory \Windows\SYSTEM32\CONFIG damaged or lost




If you get an error with the words:

"Windows could not start because the following files is missing or corrupted
\ WINDOWS \ SYSTEM32 \ CONFIG \ SYSTEM or \ WINDOWS \ SYSTEM32 \ CONFIG \ SOFTWARE "

* Insert the Windows XP CD and booting from the CD.
* At the time appeared R = Repair option first, press the R.
* Press the number according to the location of the Windows installation you want repaired as appropriate.
* Usually, # 1
* Enter the administrator password if necessary.
* Write: cd \ windows \ system32 \ config
* Next depending on the location of the damage:
* Write: software system fail software OR fail system
* Next again also depends on the location of the damage:
* Write: copy \ windows \ repair \ system
* Write: copy \ windows \ repair \ software
* Remove your CD and type EXIT


NTLDR or NTDETECT.COM not found




If you find an error that NTLDR not found when booting:

1. For the type of FAT partition

Feel free to boot from your Win98 floppy and copy the files NTLDR or NTDETECT.COM
from the i386 directory to the drive stem / root (root) C: \

2. For the type of NTFS partition

* Insert the Windows XP CD and booting from the CD.
* At the time appeared R = Repair option first, press the R.
* Press the number according to the location of the Windows installation you want repaired as appropriate.
* Usually, # 1
* Enter the administrator password if necessary.
* Enter the following command, where X: is the address of the CD ROM drive you (Customize!).
* Write: COPY X: \ i386 \ NTLDR C \:
* Write: COPY X: \ i386 \ NTDETECT.COM C: \
* Remove your CD and type EXIT

You Done IT :-)

No comments:

Hasleo Data Recovery FreeV3.2 - Free as in Freeware - Permanently from Hasleo Software

https://www.hasleo.com/win-data-recovery/free-data-recovery.html "Hasleo Data Recovery FreeV3.2 100% Free Data Recovery Software...